TRD2000 Corrolla p/n's

Any leads on a set up? For mine ?

I'd just be looking around any local wreckers, especially the big open-air ones. Any AE102 (ie 1.8, so Conquest, RV, CSX 1.8, Ultima) will have rear discs (CSi and CSX 1.6 AE101s have the drums), whereas you have to find a bugeye CSX/Levin, or facelift Levin/Sportivo/Ultima (the Ascent and Conquest still have drums) AE112. AE102s should be more common too, since they were sold for longer ('94 to '99, whereas the 112 was only late '98 to late '01) and I'm fairly sure in greater numbers.

There are a bunch of bug eyes with rear disc at my local
I can use there set up ?

Like this one ?http://images.drive.com.au/drive_images/Editorial/2006/09/04/4usedM_m.jpg

Can't recall if the setup is identical, but if you grab all the associated hardware (rotors, calipers, hubs, etc, maybe even control arms too) then I doubt you'll run into much problem. The AE10x and AE11x essentially run the same chassis.

I'll stick my head under one in the weekend with the camera

I've had a response from a guy wrecking some non turbo sw20
I asked him for the short side drive shaft

He asked me I I need abs or non abs?

Does it matter ?

He mentioned auto or manual as well ?

Does that matter?

Do I just ask for the shaft and cv? Anything else I should ask for while I'm there?

i dont think it matters about the abs ring. however you want a full short shaft inc the CV from a Manial

I'll tell him now to keep the manual shaft aside

Ok good news friends

Paid for entire disk brake assembly
Hubs , discs , proportioning valve , handbrake cables

And the short side sw20 drive shaft!!!

Getting a big pile of stuff


Will
Do the brakes first

Any tips for the brake swap?

rear brake swap or front?

Rears

I'll use that Toyota DIY website to get the rav 4 engine mount them I'm set

I have the details of a guy who makes custom looms
So will have a talk with him when te time comes

So chaps this happened on friday

ended up with no gears and rolled home hahha

as you can see it was taped up a while ago as the plastic was all broken and i tried to get replacements second hand but there were a few different kinds for the ae101 so i just taped it up

so i made an order to Toyota and now im waiting for the parts to come in just over $200.00 AUD
pn# 33821



its now sitting like this waiting for the part to come in its a shame as i will be doing the engine swap to a 3s soon so its hard to justify but i need it running for the time being




was pretty bad

i paid for the cable at toyota before xmas and they said today sorry we cant supply

so im stuck with no where to go please see the diagram below


so toyota don't have this part for sale in Australasia anymore
and there are not many in the wreckers/breakers yards at the moment

i was hoping that there was an aftermarket company that made these but no luck as yet

any input from you guys?

They should be able to get it from Japan.
Let me know I should be able to source a new 1 for you, or better yet I'll have a FXGT cable available in a couple of weeks

You can use the corolla shifter cables for the 3s swap too

really?

yeah i did

We'll I have the new (used)ones here at work now
I'm on a 12 hour shift and I won't be home until 7pm

Just want I go home and fix this I miss driving it
I'm currently driving the wife's nissan cube ad it's slooooow

all fixed!
great to be driving her again!

Quick question guys

the beams im buying is missing the north south mounts

im assuming i can use the one from a 5sfe like in a celica as they are the same as 3sge mounts

regards

argh the toyota diy site no longer has diagrams?!

Apparently not, or so I heard...